aka: “The Sweetpost”

Infinite Adjustability.

Ordering and installing the “Sweetpost”


To determine the length seatpost you will need, measure from your seatclamp (where your seatpost enters your frame) to the rails of your current saddle and add 7cm (7cm is our minimum insertion line). If you are close we recommend going up one size.

All posts, 27.2 and 30.9 diameters come in the following lengths: 250, 300, 360 and 400 mm.

** We do not make a 31.6 seatpost.

Posts can be ordered either straight or layback (20 mm actual layback)

Seatpost hardware colors: Red, blue, green, pewter, black, orange, brown, and pink.

Custom layback and/or length posts can be made for an additional $25. WE WILL NOT WARRANTY POSTS LONGER THAN 400 mm or OVER 20 mm OF LAYBACK.

All seatposts are made-to-order and typically ship within 7 days of order placement.

If you have further questions about the seatposts please email us at If you would like to place an order, please use our online store. Dealers, please get setup in our system using this email, then order online!

Saddle Requirements

Our seatpost hardware fits traditional, round style, 7 mm diameter saddle rails only. This accommodates about 90% of the saddles on the market. Please note, some rails are tighter to mount into the hardware than others.

Our seatpost hardware does not fit oval 7x9mm carbon rails.

Mounting the saddle on the seat post: Slide the seat into the hardware from the rear, not over the top. Tighten the bolt, ensuring the threads are lined up. Torque meter recommendation is 12-15 Newton meters and/or 8-11 foot pounds.

Seatpost weights in general, fully assembled are as follows (layback and straight) 250=174g 300= 194 g 360=217 400=233g

Please email us at if you have any questions or problems with your seatpost.

Seatpost Lengths and Prices

250 mm $260.00 $280.00
300 mm $260.00 $280.00
360 mm $260.00 $280.00
400 mm $260.00 $280.00
Custom length/layback $25.00